Whether it's about the low beams, high beams or turn signals, the bulb replacement is an extremely repair easy to do . But when a fire is not working, it should not be delayed to change it. Because some people forget it, but this is condemned by a fine which can go up to 68 euros. Obviously, it will be necessary to start repairing them for security reasons. Here is therefore how to change the headlight bulb on your seat alhambra, step by step. In the following, we will find out how to properly adjust them.
How to replace the bulb on a seat alhambra headlight
Now there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly put on the side now, and more and more bulbs LED . They are much less power hungry and more resistant. Regardless of the type of bulb, the way to replace them will be similar. Below is the logic to follow for change the bulb of your seat alhambra .
- Disconnect the battery in order to work more serenely.
- Clear access to the rear portion of the light. It will sometimes be necessary to disassemble the battery, or covers.
- Remove the rubber or plastic cover behind the fire
- Remove the fixing or unscrew the damaged bulb from your seat alhambra
- Compare it with the new one to make sure it is suitable
- Place the new bulb gently, then fix it correctly
- Replace the rubber cover then all the elements in the other direction
Now that everything is back in order, check that it works! This one should have the same intensity as the other. It is important to have completely similar products.
How to set the headlights of a seat alhambra
Now that the fire is in place, it remains plausible that the latter is out of order. It is extremely important that two lights at the same height and in the same axis. Among other things so as not to upset the drivers in the other direction. This is why they must be set correctly. To do this, you have to place your car in front of a wall. First a short distance, then a few meters. Then, you just have to adjust the fire in question in the same way as the other by comparing the halos. If neither of the two works, there are some really well-done tutorials on this.