Whether it's for low beam, high beams or turn signals, the bulb replacement is a super operation easy to execute . But if a fire stops working, you should not wait to repair it. Because many do not know, but it remains reprehensible by a fine of up to 68 euros. Obviously, it will first have to be repaired for security reasons. So that's how to change the bulb of a headlight on a seat exeo, point by point. Then we will find out how to set them correctly.
How to change the bulb of a seat exeo headlight
Today there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , somewhat put on the side now, and lots of bulbs LED . They are much less energy intensive and more resistant. Whatever the type of bulb, the way to change them will be similar. Here is the procedure to follow in order to change the bulb of your seat exeo .
- Disconnect the battery so that you can work more quietly.
- Clear access to the rear portion of the light. At times it will be necessary to remove the battery, or covers.
- Remove the rubber or plastic cover behind the fire
- Remove the fixing or unscrew the damaged bulb from the seat exeo
- Compare it well with the news to be sure it matches
- Place the new bulb gently, then fix it correctly
- Reclip the rubber cover and all components in the opposite direction
Now that everything is back in order, check that it works! This one should have the same intensity as the other. It is important to have completely identical models.
How to set the headlights of a seat exeo
After replacing a light, it is still possible that it will be out of order. It is extremely important that two lights at the same height and in the same axis. Among other things so as not to annoy motorists in the other direction. It is therefore advisable to take the time to adjust them correctly. To do this, simply position your vehicle facing a wall. To start one meter from the wall, then a few meters. Then, you just have to adjust the fire with the new bulb at the same height as the other according to the reflections on the wall. If the two are poorly adjusted, there are tutorials very well done on this subject.