Whether it's for low beam, high beams or turn signals, the changing a light bulb is a very manipulation convenient to execute . But if a light no longer works, you should not wait to replace it. Because some people forget it, but this is reprehensible by a penalty of up to 68 euros. Obviously, you are going to have to start changing them for safety reasons. Here is therefore how to change the bulb of a headlight on a Seat Ginebra, step by step. In the second step, we will find out how to properly resolve them.change-bulb-headlight-Seat-Ginebra

How to change the bulb of a Seat Ginebra headlight

Today, there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , a little neglected today, and a lot of bulbs LED . They consume much less electricity and are more robust. Whatever the type of bulb, the way to change them will be similar. Here is the procedure to follow in order to change the bulb of your Seat Ginebra .

  • Disconnect the battery to work more quietly.
  • Free access to the rear portion of the fire. It will be necessary from time to time to remove the battery, or covers.
  • Remove the rubber or plastic cover on the back of the light
  • Unclip or unscrew the broken bulb from the Seat Ginebra
  • Compare it well with the news to make sure it fits
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover and all the components in the other direction

Once everything is in order, test the bulb! This should have an intensity similar to the other. It is essential to have totally similar models.

Adjust the headlights of a Seat Ginebra

After replacing a light, it is possible that it will be out of order. It is very important that two lights at the same height and focused the same way. In particular so as not to obstruct the conductors in the other direction. They must therefore be settled properly. To do this, simply place your automobile in front of a wall. First a short distance, then 5 or 6 meters. In a second step, it is enough to adjust the fire with the new bulb at the same height as the other by comparing the halos. If the two are incorrectly adjusted, there are tutorials that can help you.