Whether it's for low beam, high beams or turn signals, the bulb replacement is a super operation convenient to perform . But in the event that a fire no longer works, it should not be long to change it. Because some people forget it, but it remains punishable by a penalty of up to 68 euros. Obviously, you are going to have to start repairing them for safety reasons. Here is therefore how to change the bulb of a headlight on your Seat Ronda, point by point. In a second step, we will see how to properly adjust them.
How to change the bulb of a Seat Ronda headlight
Today there are various types of headlight bulbs. The most common are halogen , however there are also Xenon , a little put on the side now, and more and more bulbs LED . They are much less energy intensive and more robust. No matter what kind of bulb, the way to change them will be similar. So here is the procedure to follow for change the bulb of your Seat Ronda .
- Disconnect the battery so that you can work more serenely.
- Free access to the rear part of the light. Sometimes it will be necessary to remove the battery, or covers.
- Remove the rubber or plastic cover on the back of the light
- Unclip or unscrew the broken bulb from the Seat Ronda
- Compare it well with the new one to make sure it is suitable
- Position the new bulb gently, then fix it properly
- Reclip the rubber cover and all the elements in the other direction
Once everything is in order, check that it works! The latter should have the same intensity as the other. It is essential to have perfectly similar products.
How to adjust the headlights of a Seat Ronda
After replacing a light, it is possible that it will be out of order. It is extremely important that two lights at the same height and in the same axis. In particular not to disturb the conductors opposite. That is why we must take the time to settle them properly. To do this, simply place your car facing a wall. To start a short distance, then a few meters. In a second step, simply adjust the fire with the new bulb at the same height as the other according to the reflections on the wall. If the two are incorrectly adjusted, there are tutorials that can help you.