Whether it's for low beam, high beams or turn signals, the bulb replacement is a very manipulation convenient to execute . But in the event that a fire no longer works, do not delay in repairing it. Because some people forget it, but it is reprehensible by a fine of up to 68 euros. Naturally, it is necessary to replace them for safety reasons first. So here is how to change the bulb of a headlight on your Smart For-us, step by step. In a second step, we will see how to correctly adjust them.
How to change the bulb of a Smart For-us headlight
Nowadays, there are a number of types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly put on the side today, and more and more bulbs LED . They consume less electricity and are more enduring. Regardless of the type of bulb, the way to change them will be similar. You will find below the procedure to follow for change the bulb of your Smart For-us .
- Disconnect the battery so that you can work more quietly.
- Free access to the rear portion of the fire. It will sometimes be necessary to disassemble the battery, or covers.
- Remove the rubber or plastic cover on the back of the light
- Remove the fixing or unscrew the defective bulb from your Smart For-us
- Compare it with the news to make sure it matches
- Position the new bulb gently, then fix it correctly
- Reclip the rubber cover and all of the elements by following the reverse procedure
Now that everything is in order, test the bulb! The latter should display the same intensity as the other. It is essential to have totally similar models.
How to configure the headlights of a Smart For-us
Now that the fire is in place, it is plausible that the latter is out of order. It is very important that two lights at the same height and focused the same way. In particular not to annoy motorists opposite. They must therefore be set correctly. To do this, simply place your vehicle facing a wall. First a short distance, then 5 or 6 meters. In a second step, you just have to adjust the fire with the new bulb at the same height as the other according to the reflections on the wall. If the two are poorly adjusted, there are tutorials very well done on this subject.