Whether it's for low beam, high beams or turn signals, the changing a light bulb is a super repair easy to perform . But when a fire no longer works, it should not be long to change it. Because many forget it, but it is punishable by a fine of up to 68 euros. Obviously, it is first of all necessary to replace them for safety reasons. Here is how to change the bulb of a headlight on the Smart Forvision, step by step. In a second step, we will find out how to properly resolve them.change-bulb-headlight-Smart-Forvision

How to replace the bulb in a Smart Forvision headlight

Now there are various types of headlight bulbs. The most common are halogen , but we can also find Xenon , a little neglected now, and a lot of bulbs LED . The latter consume less electricity and are more enduring. Regardless of the type of bulb, the way to replace them will be similar. So here is the procedure to follow for change the bulb of your Smart Forvision .

  • Disconnect the battery in order to work more serenely.
  • Free access to the rear part of the light. At times it will be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover behind the fire
  • Unclip or unscrew the defective bulb from the Smart Forvision
  • Compare it well with the new one to make sure it is suitable
  • Position the new bulb gently, then fix it properly
  • Reclip the rubber cover then all the components following the reverse procedure

Now that everything is in order, test the bulb! This one should have an intensity equal to the other. It is essential to have perfectly similar products.

How to set the headlights of a Smart Forvision

Now that the fire is in place, it is plausible that the latter is out of order. It is extremely important that two lights at the same height and in the same axis. Among other things so as not to disturb the conductors opposite. That is why we must take the time to settle them properly. To do this, simply position your car facing a wall. First a short distance, then a few meters. In a second step, you will just have to adjust the light in question at the same height as the other by comparing the halos. If neither goes, there are tutorials very well on this subject.