Whether it's for low beam, high beams or turn signals, the changing a light bulb is a super operation convenient to execute . But if ever a fire does not work, it should not be long to replace it. Because many forget it, but this is reprehensible by a fine of up to 68 euros. Of course, they will first have to be replaced for safety reasons. So that's how to replace the headlight bulb on a smart roadster, point by point. Next, we will find out how to set them correctly.
How to change the bulb of a smart roadster headlight
Now there are a number of types of headlight bulbs. The most common are halogen , however there are also Xenon , a little put on the side now, and a lot of bulbs LED . The latter are much less greedy in electricity and more resistant. Whatever the type of bulb, the way to change them will be similar. So here is the logic to follow in order to replace the bulb of your smart roadster .
- Disconnect the battery to work more comfortably.
- Free access to the rear part of the light. From time to time it will be necessary to remove the battery, or covers.
- Remove the rubber or plastic cover on the back of the light
- Unclip or unscrew the defective bulb from the smart roadster
- Compare it with the new one to be sure it fits
- Place the new bulb gently, then fix it properly
- Reclip the rubber cover and all the components following the reverse procedure
Once everything is in place, test the bulb! This one should have the same intensity as the other. It is essential to have perfectly similar models.
How to configure the headlights of a smart roadster
Now that the fire is in place, it remains possible that it is out of order. It is extremely important that two lights at the same height and focused the same way. In particular not to upset the motorists you meet. So take the time to adjust them correctly. To do this, simply place your car in front of a wall. First a meter from the wall, then a few meters. Then just adjust the fire with the new bulb in the same way as the other according to the reflections on the wall. If neither of them goes, there are tutorials that can help you.