Whether it's for low beam, high beams or turn signals, the bulb replacement is a very operation convenient to make . But in the event that a fire no longer works, it should not be delayed to replace it. Because some people forget it, but it remains reprehensible by a fine of up to 68 euros. Obviously, you will first have to replace them for security reasons. Here is therefore how to change the bulb of a headlight on your smart smart, step by step. In the following, we will find out how to properly adjust them.change-headlight-bulb-smart-smart

How to change the bulb of a smart smart headlight

Nowadays, there are a number of types of headlight bulbs. The most common are halogen , however we can also find Xenon , somewhat put on the side today, and a lot of bulbs LED . They consume much less electricity and are more enduring. Regardless of the type of bulb, the way to change them will be the same. So this is the logic to follow in order to change the bulb of your smart smart .

  • Disconnect the battery in order to work more quietly.
  • Free access to the rear portion of the fire. At times it will be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover on the back of the light
  • Unclip or unscrew the defective bulb from your smart smart
  • Compare it well with the news to be sure it matches
  • Position the new bulb gently, then fix it correctly
  • Reclip the rubber cover then all the components in the opposite direction

Once everything is in place, test the bulb! The latter should have the same intensity as the other. It's important to have perfectly similar models.

Correctly adjusting the headlights of a smart smart

After replacing a light, it is still possible that it will be out of order. It is very important that two lights at the same height and focused in the same way. Among other things so as not to annoy motorists in the other direction. You must therefore take the time to adjust them correctly. To do this, you just have to position your car facing a wall. To start a short distance, then a few yards. Then, you just have to adjust the light with the new bulb at the same height as the other according to the reflections on the wall. If neither of the two works, there are some very well-made tutorials on the subject.