That it concerns low beam, high beams or turn signals, the bulb replacement is an extremely manipulation convenient to perform . But when a fire doesn't work, you don't have to wait to change it. Because many forget it, but this is reprehensible by a fine of up to 68 euros. Of course, you will have to repair them first for safety reasons. Here is therefore how to replace the bulb of a headlight on your Suzuki Alto 2, point by point. In a second step, we will see how to correctly adjust them.
How to change the bulb of a Suzuki Alto 2 headlight
Today, there are several types of headlight bulbs. The most common are halogen , but there are also Xenon , somewhat neglected now, and lots of bulbs LED . The latter consume less electricity and are more enduring. Whatever the type of bulb, the way to change them will be the same. Here is the process to follow in order to replace the bulb of your Suzuki Alto 2 .
- Disconnect the battery in order to work more serenely.
- Clear access to the rear part of the light. It will sometimes be necessary to remove the battery, or covers.
- Remove the rubber or plastic cover behind the fire
- Remove the fixing or unscrew the defective bulb from the Suzuki Alto 2
- Compare it with the new one to be sure it matches
- Position the new bulb gently, then fix it correctly
- Reclip the rubber cover and all of the components, following the reverse procedure
Now that everything is in order, test the bulb! The latter should have the same intensity as the other. It is essential to have completely identical models.
How to configure the headlights of a Suzuki Alto 2
Now that the fire is in place, it is plausible that it is out of order. It is very important that two lights at the same height and focused in the same way. Notably so as not to annoy motorists in the other direction. They should therefore be adjusted correctly. To do this, you must place your vehicle in front of a wall. First one meter from the wall, then five or six meters. Secondly, you just have to adjust the light in question to the same height as the other by comparing the halos. If neither of the two works, there are tutorials that can help.