Whether it's about the low beams, high beams or turn signals, the bulb replacement is an extremely repair simple to execute . But if a fire stops working, you should not wait to repair it. Because some people forget it, but it remains condemnable by a sanction which can go up to 68 euros. Of course, they must first be changed for safety reasons. Here is how you can replace the headlight bulb on your Suzuki Baleno 2, step by step. In a second step, we will find out how to set them correctly.change-headlight-bulb-Suzuki-Baleno-2

How to replace the bulb of a Suzuki Baleno 2 headlight

Today, there are a number of types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly neglected today, and lots of bulbs LED . These are much less power hungry and more robust. Regardless of the type of bulb, the way to replace them will be similar. You will find below the logic to follow for replace the bulb in your Suzuki Baleno 2 .

  • Disconnect the battery so that you can work more serenely.
  • Free access to the rear portion of the fire. Sometimes it will be necessary to disassemble the battery, or else covers.
  • Remove the rubber or plastic cover behind the fire
  • Unclip or unscrew the damaged bulb of your Suzuki Baleno 2
  • Compare it well with the new one to make sure it is suitable
  • Place the new bulb gently, then fix it correctly
  • Replace the rubber cover and all components in the opposite direction

Now that everything is back in order, check that it works! The latter should display an intensity equal to the other. It is essential to have perfectly similar products.

How to adjust the headlights of a Suzuki Baleno 2

Now that the fire is in place, it may be out of order. It is very important that two lights at the same height and focused the same way. In particular not to annoy the conductors opposite. They should therefore be adjusted correctly. To do this, simply position your car in front of a wall. To start a short distance, then a few meters. In a second step, you just have to adjust the fire with the new bulb in the same way as the other according to the reflections on the wall. If the two are poorly adjusted, there are tutorials very well done on this subject.