Whether it's about the low beams, high beams or turn signals, the bulb replacement is a super repair easy to perform . But if a fire does not work, we should not wait to replace it. Because many do not know it, but this remains punishable by a fine of up to 68 euros. Of course, it will be necessary above all to change them for safety reasons. So here is how to replace the bulb of a headlight on the Suzuki Baleno, step by step. Second, we will find out how to properly adjust them.
How to change the bulb of a Suzuki Baleno headlight
Now there are various types of headlight bulbs. The most common are halogen , however we can also find Xenon , slightly put on the side today, and more and more bulbs LED . These consume less electricity and are more robust. Regardless of the type of bulb, the way to change them will be the same. So this is the logic to follow for replace the bulb of your Suzuki Baleno .
- Disconnect the battery in order to work more quietly.
- Clear access to the rear portion of the light. It will sometimes be necessary to remove the battery, or covers.
- Remove the rubber or plastic cover on the back of the light
- Remove the fixing or unscrew the broken bulb from the Suzuki Baleno
- Compare it with the news to make sure it is suitable
- Put the new bulb down gently, then fix it properly
- Replace the rubber cover and then all the elements in the opposite direction
Now that everything is in order, check that it works! This one should have the same intensity as the other. It is essential to have perfectly similar models.
How to adjust the headlights of a Suzuki Baleno
Now that the fire is in place, it is plausible that it is out of order. It is very important that two lights at the same height and in the same axis. Among other things so as not to annoy the drivers in front. It is therefore advisable to take the time to adjust them properly. To do this, simply position your vehicle facing a wall. First a short distance, then a few meters. Second, it is sufficient to adjust the fire in question to the same height as the other according to the reflections on the wall. If neither of the two works, there are some very well-done tutorials on this.