Whether it's for low beam, high beams or turn signals, the bulb replacement is a very operation easy to perform . But if ever a fire does not work any more, one should not wait to repair it. Because many forget it, but this remains punishable by a fine which can go up to 68 euros. Obviously, they will have to be repaired first for safety reasons. Here is therefore how to change the bulb of a headlight on the Suzuki Grand Vitara 2, step by step. Then we will find out how to properly adjust them.
How to replace the bulb of a Suzuki Grand Vitara 2 headlight
Nowadays, there are a number of types of headlight bulbs. The most common are halogen , however there are also Xenon , somewhat neglected now, and lots of light bulbs LED . The latter are much less energy-intensive and more resistant. Regardless of the type of bulb, the way to replace them will be the same. Below is the logic to follow for change the bulb of your Suzuki Grand Vitara 2 .
- Disconnect the battery so that you can work more comfortably.
- Clear access to the rear portion of the light. Sometimes it will be necessary to remove the battery, or covers.
- Remove the rubber or plastic cover on the back of the light
- Remove the fixing or unscrew the broken bulb from the Suzuki Grand Vitara 2
- Compare it with the new one to make sure it is suitable
- Position the new bulb gently, then fix it properly
- Replace the rubber cover and all the elements in the other direction
Once everything is back to order, test the bulb! This one should have a similar intensity to the other. It is essential to have completely similar models.
How to adjust the headlights of a Suzuki Grand Vitara 2
Now that the fire is in place, it remains plausible that it is out of order. It is extremely important that two lights at the same height and in the same axis. Among other things, so as not to annoy the drivers in front. This is why they must be properly regulated. To do this, you must place your car in front of a wall. First a short distance, then 5 or 6 meters. Then you just have to adjust the fire in question to the same height as the other according to the reflections on the wall. If neither of them works, there are tutorials that can help you.