That it concerns low beam, high beams or turn signals, the bulb replacement is an extremely convenient to make . But in the event that a light no longer works, it should not be long to change it. Because many do not know it, but it remains punishable by a fine which can go up to 68 euros. Naturally, it is necessary to begin by replacing them for safety reasons. So here is how to replace the headlight bulb on your Suzuki Grand Vitara, point by point. Second, we will find out how to properly adjust them.
How to replace the bulb of a Suzuki Grand Vitara headlight
Today there are various types of headlight bulbs. The most common are halogen , however we can also find Xenon , a little neglected now, and a lot of bulbs LED . These are much less greedy in electricity and more enduring. Whatever the type of bulb, the way to replace them will be similar. You will find below the procedure to follow in order to replace the bulb in your Suzuki Grand Vitara .
- Disconnect the battery in order to work more serenely.
- Clear access to the rear portion of the light. At times it will be necessary to remove the battery, or else covers.
- Remove the rubber or plastic cover behind the fire
- Unclip or unscrew the broken bulb of your Suzuki Grand Vitara
- Compare it well with the new one to be sure that it is suitable
- Place the new bulb gently, then fix it properly
- Replace the rubber cover then all the components following the reverse procedure
Now that everything is in place, test the bulb! This one should have the same intensity as the other. It is essential to have perfectly identical products.
How to set the headlights of a Suzuki Grand Vitara
Now that the fire is in place, it is plausible that it is out of order. It is extremely important that two lights at the same height and focused the same way. In particular so as not to obstruct the conductors in the other direction. They should therefore be adjusted properly. To do this, you just have to position your vehicle in front of a wall. First a meter from the wall, then 5 or 6 meters. Second, you just have to adjust the light with the new bulb in the same way as the other by comparing the halos. If neither of them goes, we find tutorials very well done on this subject.