Whether it's about the low beams, high beams or turn signals, the bulb replacement is an extremely manipulation convenient to make . But if a fire never stops working, you should not wait to change it. Because some people ignore it, but it remains reprehensible by a sanction which can go up to 68 euros. Of course, we will first have to replace them for safety reasons. Here is therefore how to replace the headlight bulb on a Suzuki Ignis 2, step by step. Second, we will find out how to properly adjust them.
How to replace the bulb of a Suzuki Ignis 2 headlight
Nowadays, there are a number of types of headlight bulbs. The most common are halogen , but there are also Xenon , put on the side now, and more and more light bulbs LED . They consume much less energy and are more robust. Regardless of the type of bulb, the way to replace them will be the same. Here is the procedure to follow in order to replace the bulb in your Suzuki Ignis 2 .
- Disconnect the battery so that you can work more serenely.
- Clear access to the rear part of the light. From time to time it will be necessary to remove the battery, or covers.
- Remove the rubber or plastic cover behind the fire
- Remove the fixing or unscrew the defective bulb from your Suzuki Ignis 2
- Compare it with the new one to make sure it fits
- Place the new bulb gently, then fix it properly
- Replace the rubber cover then all the elements in reverse
Now that everything is in order, test the bulb! This one should have an intensity equal to the other. It is essential to have perfectly similar models.
How to set the headlights of a Suzuki Ignis 2
Now that the fire is in place, it is plausible that it is out of order. It is extremely important that two lights at the same height and in the same axis. In particular not to upset the motorists you meet. That is why we must take the time to settle them properly. To do this, simply position your automobile in front of a wall. To start one meter from the wall, then 5 or 6 meters. Second, just set the light in question to the same height as the other according to the reflections on the wall. If neither of them goes, there are tutorials that can help you.