Whether it's for low beam, high beams or turn signals, the changing a light bulb is an extremely simple to do . But if ever a fire does not work any more, it is not necessary to wait to repair it. Because some people do not know it, but this remains punishable by a fine of up to 68 euros. Of course, you will have to replace them first for safety reasons. Here is therefore how to change the bulb of a headlight on a Suzuki Jimny, point by point. In a second step, we will find out how to properly adjust them.
How to change the bulb of a Suzuki Jimny headlight
Nowadays, there are various types of headlight bulbs. The most common are halogen , however there are also Xenon , a little neglected today, and a lot of bulbs LED . These consume much less energy and are more robust. Whatever the type of bulb, the way to change them will be the same. So this is the logic to follow for change the bulb of your Suzuki Jimny .
- Disconnect the battery so that you can work more comfortably.
- Clear access to the rear part of the light. Sometimes it will be necessary to remove the battery, or else covers.
- Remove the rubber or plastic cover behind the fire
- Remove the fixing or unscrew the defective bulb from your Suzuki Jimny
- Compare it well with the news to make sure it matches
- Place the new bulb gently, then fix it properly
- Replace the rubber cover and all the components, following the reverse procedure
Now that everything is back in order, test the bulb! This one should have a similar intensity to the other. It is essential to have perfectly identical products.
How to adjust the headlights of a Suzuki Jimny
Now that the fire is in place, it remains possible that it is out of order. It is very important that two lights at the same height and focused in the same way. Notably so as not to upset motorists in front. This is why we must take the time to adjust them properly. To do this, you just have to position your car facing a wall. First a meter from the wall, then a few meters. In a second step, you will just have to adjust the fire in question in the same way as the other by comparing the halos. If both are incorrectly set, there are tutorials that can help you.