Whether it's about the low beams, high beams or turn signals, the changing a light bulb is a very manipulation simple to do . But when a fire does not work, it should not be long before replacing it. Because many forget it, but it remains reprehensible by a fine of up to 68 euros. Of course, it will first have to be replaced for safety reasons. This is therefore how to change the bulb of a headlight on the Suzuki Liana, point by point. In a second step, we will find out how to set them correctly.change-bulb-headlight-Suzuki-Liana

How to replace the bulb of a Suzuki Liana headlight

Today, there are several types of headlight bulbs. The most common are halogen , but there are also Xenon , slightly neglected now, and more and more bulbs LED . These are less energy intensive and more resistant. Whatever the type of bulb, the way to replace them will be similar. Here is the logic to follow in order to change the bulb of your Suzuki Liana .

  • Disconnect the battery in order to work more serenely.
  • Free access to the rear part of the light. It will sometimes be necessary to disassemble the battery, or covers.
  • Remove the rubber or plastic cover on the back of the fire
  • Remove the fixing or unscrew the defective bulb from the Suzuki Liana
  • Compare it well with the news to make sure it fits
  • Position the new bulb gently, then fix it correctly
  • Replace the rubber cover and all the elements in the other direction

Now that everything is back in order, check that it works! The latter should display an intensity similar to the other. It is essential to have perfectly identical models.

How to adjust the headlights of a Suzuki Liana

After replacing a light, it remains plausible that it will be out of order. It is very important that two lights at the same height and focused the same way. In particular not to disturb the drivers you meet. They should therefore be adjusted correctly. To do this, simply place your automobile in front of a wall. To start a short distance, then a few meters. In a second step, you will just have to adjust the fire with the new bulb at the same height as the other according to the reflections on the wall. If the two are poorly adjusted, there are tutorials very well done on this subject.