That it concerns low beam, high beams or turn signals, the changing a light bulb is an extremely repair convenient to execute . But if a light does not work, do not wait to replace it. Because some people forget it, but it is punishable by a fine of up to 68 euros. Of course, it will first have to be replaced for safety reasons. So that's how to replace the headlight bulb on the Suzuki Splash, step by step. In a second step, we will see how to correctly adjust them.
How to replace the bulb of a Suzuki Splash headlight
Nowadays, there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly put on the side today, and more and more bulbs LED . These are less energy consuming and more robust. Whatever the type of bulb, the way to replace them will be identical. Here is the logic to follow in order to replace the bulb of your Suzuki Splash .
- Disconnect the battery so that you can work more quietly.
- Clear access to the rear portion of the light. From time to time it will be necessary to remove the battery, or else covers.
- Remove the rubber or plastic cover on the back of the light
- Unclip or unscrew the defective bulb from the Suzuki Splash
- Compare it with the new one to be sure it matches
- Place the new bulb gently, then fix it correctly
- Replace the rubber cover and all the elements in reverse order
Once everything is in order, check that it works! The latter should display an intensity equal to the other. It is important to have perfectly similar models.
How to adjust the headlights of a Suzuki Splash
After replacing a light, it remains plausible that it will be out of order. It is extremely important that two lights at the same height and focused the same way. Among other things so as not to hinder motorists opposite. They should therefore be adjusted correctly. To do this, simply position your vehicle in front of a wall. First a short distance, then a few meters. In a second step, you will just have to adjust the fire with the new bulb at the same height as the other by comparing the halos. If neither of them goes, there are tutorials that can help you.