Whether it's for low beam, high beams or turn signals, the changing a light bulb is an extremely easy to do . But if a fire never stops working, do not wait to repair it. Because many are unaware of it, but this is condemnable by a contravention which can go up to 68 euros. Of course, you have to start by changing them for safety reasons. So that's how to change the headlight bulb on a Suzuki Swift 3, step by step. Next, we will find out how to set them correctly.change-bulb-headlight-Suzuki-Swift-3

How to replace the bulb of a headlight of Suzuki Swift 3

Nowadays, there are various types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly put on the side now, and more and more bulbs LED . They consume much less electricity and are more resistant. Whatever the type of bulb, the way to replace them will be similar. So here is the procedure to follow for change the bulb of your Suzuki Swift 3 .

  • Disconnect the battery to work more comfortably.
  • Clear access to the rear part of the light. It will sometimes be necessary to remove the battery, or else covers.
  • Remove the rubber or plastic cover on the back of the light
  • Unclip or unscrew the defective bulb from the Suzuki Swift 3
  • Compare it with the news to make sure it fits
  • Position the new bulb gently, then fix it correctly
  • Replace the rubber cover then all the components in the opposite direction

Once everything is in order, check that it works! The latter should have the same intensity as the other. It is essential to have perfectly similar products.

How to properly adjust the headlights of a Suzuki Swift 3

Now that the fire is in place, it is possible that the latter is out of order. It is extremely important that two lights at the same height and in the same axis. In particular not to annoy the conductors in the other direction. They must therefore be set correctly. To do this, you just have to place your vehicle in front of a wall. To start one meter from the wall, then a few meters. Then, you just have to adjust the fire with the new bulb in the same way as the other by comparing the halos. If the two are wrong, there are tutorials that can help.