Whether it's for low beam, high beams or turn signals, the bulb replacement is an extremely simple to execute . But if a fire doesn't work, we shouldn't wait to fix it. Because some people forget it, but it is punishable by a fine which can go up to 68 euros. Obviously, it will first be necessary to replace them for safety reasons. Here is therefore how to replace the headlight bulb on your Suzuki Sx4 S-cross, step by step. Second, we will find out how to properly adjust them.
How to replace the bulb of a Suzuki Sx4 S-cross headlight
Today there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , somewhat put on the side now, and more and more bulbs LED . They consume less energy and are more robust. Regardless of the type of bulb, the way to replace them will be similar. Below is the logic to follow in order to replace the bulb of your Suzuki Sx4 S-cross .
- Disconnect the battery so that you can work more serenely.
- Clear access to the rear portion of the light. At times it will be necessary to remove the battery, or covers.
- Remove the rubber or plastic cover behind the fire
- Remove the fixing or unscrew the damaged bulb from your Suzuki Sx4 S-cross
- Compare it with the new one to make sure it is suitable
- Place the new bulb gently, then fix it properly
- Reclip the rubber cover and all the elements following the reverse procedure
Once everything is in place, check that it works! The latter should have a similar intensity to the other. It is essential to have perfectly similar models.
How to adjust the headlights of a Suzuki Sx4 S-cross
Now that the fire is in place, it is possible that it has been disturbed. It is very important that two lights at the same height and focused in the same way. Among other things, so as not to annoy the motorists you meet. It is therefore advisable to take the time to adjust them correctly. To do this, you just have to position your automobile in front of a wall. First a meter from the wall, then a few meters. Second, you just have to adjust the light with the new bulb in the same way as the other according to the reflections on the wall. If neither of the two works, there are some very well done tutorials on the subject.