That it concerns low beam, high beams or turn signals, the bulb replacement is a super manipulation simple to do . But if a fire does not work, it must not be long before changing it. Because some people do not know it, but it is condemnable by a penalty of up to 68 euros. Of course, you will have to replace them first for security reasons. Here is therefore how to change the headlight bulb on a Suzuki Vitara 2, point by point. Second, we will find out how to set them correctly.change-bulb-headlight-Suzuki-Vitara-2

How to replace the bulb of a headlight of Suzuki Vitara 2

Now there are a number of types of headlight bulbs. The most common are halogen , however there are also Xenon , a little neglected today, and more and more bulbs LED . These are much less energy intensive and more resistant. Regardless of the type of bulb, the way to replace them will be the same. So here is the procedure to follow for change the bulb of your Suzuki Vitara 2 .

  • Disconnect the battery to work more comfortably.
  • Clear access to the rear part of the light. At times it will be necessary to remove the battery, or else covers.
  • Remove the rubber or plastic cover behind the fire
  • Remove the fixing or unscrew the defective bulb from the Suzuki Vitara 2
  • Compare it well with the news to make sure it fits
  • Place the new bulb gently, then fix it correctly
  • Replace the rubber cover then all the elements in the other direction

Now that everything is in order, test the bulb! The latter should have the same intensity as the other. It is important to have perfectly identical products.

How to properly configure the headlights of a Suzuki Vitara 2

After replacing a light, it is plausible that it will be out of order. It is extremely important that two lights at the same height and in the same axis. In particular so as not to obstruct the conductors in the other direction. It is therefore advisable to take the time to adjust them correctly. To do this, you just have to position your car in front of a wall. To start a short distance, then a few meters. Second, just set the light in question to the same height as the other by comparing the halos. If the two are incorrectly adjusted, there are tutorials that can help you.