Whether it's about the low beams, high beams or turn signals, the changing a light bulb is a very operation easy to do . But if a fire does not work, you should not wait to replace it. Because some people forget it, but this is punishable by a fine of up to 68 euros. Of course, it is necessary to start repairing them for safety reasons. Here is how to replace the headlight bulb on the Suzuki Vitara 4, step by step. In a second step, we will find out how to set them correctly.
How to change the bulb of a Suzuki Vitara 4 headlight
Now there are various types of headlight bulbs. The most common are halogen , however we can also find Xenon , a little put on the side today, and more and more bulbs LED . They consume less electricity and are more resistant. Whatever the type of bulb, the way to change them will be similar. So here is the logic to follow in order to replace the bulb in your Suzuki Vitara 4 .
- Disconnect the battery so that you can work more quietly.
- Free access to the rear part of the light. Sometimes it will be necessary to remove the battery, or covers.
- Remove the rubber or plastic cover on the back of the light
- Unclip or unscrew the broken bulb of the Suzuki Vitara 4
- Compare it with the news to make sure it is suitable
- Position the new bulb gently, then fix it correctly
- Replace the rubber cover and then all of the components, following the reverse procedure
Now that everything is in place, test the bulb! This should have an intensity similar to the other. It is essential to have perfectly similar products.
Adjust the headlights of a Suzuki Vitara 4
Now that the fire is in place, it remains possible that it is out of order. It is extremely important that two lights at the same height and focused the same way. Among other things so as not to hinder motorists opposite. So take the time to set them correctly. To do this, you must position your vehicle in front of a wall. First one meter from the wall, then 5 or 6 meters. In a second step, you will just have to adjust the fire in question in the same way as the other by comparing the halos. If neither goes, there are very good tutorials on this.