That it concerns low beam, high beams or turn signals, the bulb replacement is an extremely repair easy to do . But in the event that a fire no longer works, it should not be long to repair it. Because some people do not know it, but it remains reprehensible by a penalty of up to 68 euros. Of course, they must first be changed for safety reasons. This is how to change the bulb of a headlight on the Suzuki Vitara, point by point. Second, we will find out how to properly adjust them.change-headlight-bulb-Suzuki-Vitara

How to change the bulb of a Suzuki Vitara headlight

Today, there are various types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly put on the side today, and a lot of bulbs LED . These are less energy intensive and more robust. No matter what kind of bulb, the way to change them will be similar. You will find below the procedure to follow for change the bulb of your Suzuki Vitara .

  • Disconnect the battery so that you can work more comfortably.
  • Free access to the rear portion of the fire. From time to time it will be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover on the back of the light
  • Unclip or unscrew the broken bulb of the Suzuki Vitara
  • Compare it with the new one to make sure it matches
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover and then all of the components in reverse order

Now that everything is in place, test the bulb! The latter should display the same intensity as the other. It is essential to have completely identical products.

How to set the headlights of a Suzuki Vitara

Now that the fire is in place, it is possible that it is out of order. It is extremely important that two lights at the same height and focused the same way. In particular not to annoy the motorists opposite. It is therefore advisable to take the time to settle them properly. To do this, you just have to place your car facing a wall. To start a short distance, then a few meters. Secondly, you will just have to adjust the fire in question in the same way as the other by comparing the halos. If the two are poorly adjusted, there are tutorials very well done on this subject.