That it concerns low beam, high beams or turn signals, the changing a light bulb is a super repair easy to execute . But in case a fire does not work, it should not be long to repair it. Because some people forget it, but this is reprehensible by a penalty of up to 68 euros. Of course, they must first be changed for security reasons. So here is how to change the headlight bulb on the Suzuki Wagon R, step by step. Thereafter, we will find out how to correctly adjust them.change-bulb headlamp Suzuki Wagon-R

How to change the bulb of a Suzuki Wagon R headlight

Now there are a number of types of headlight bulbs. The most common are halogen , however there are also Xenon , somewhat put on the side now, and lots of bulbs LED . These are much less energy consuming and more enduring. Whatever the type of bulb, the way to change them will be similar. You will find below the procedure to follow for change the bulb of your Suzuki Wagon R .

  • Disconnect the battery to work more comfortably.
  • Clear access to the rear part of the light. It will sometimes be necessary to disassemble the battery, or covers.
  • Remove the rubber or plastic cover on the back of the light
  • Remove the fixing or unscrew the broken bulb from the Suzuki Wagon R
  • Compare it well with the new one to be sure it matches
  • Place the new bulb gently, then fix it correctly
  • Reclip the rubber cover and all the components following the reverse procedure

Once everything is in place, check that it works! This should display an intensity similar to the other. It is essential to have totally similar products.

How to properly configure the headlights of a Suzuki Wagon R

Now that the fire is in place, it is possible that it is out of order. It is extremely important that two lights at the same height and in the same axis. In particular not to upset motorists in the other direction. They should therefore be adjusted correctly. To do this, you must place your vehicle in front of a wall. To start a short distance, then 5 or 6 meters. Thereafter, you will just have to adjust the fire with the new bulb in the same way as the other by comparing the halos. If the two are incorrectly adjusted, there are tutorials that can help you.