That it concerns low beam, high beams or turn signals, the bulb replacement is an extremely simple to perform . But if a fire never works, you should not wait to replace it. Because some people do not know it, but it is punishable by a fine of up to 68 euros. Obviously, they will first have to be replaced for safety reasons. So that's how to replace the headlight bulb on a Suzuki X90, point by point. In a second step, we will see how to properly adjust them.change-bulb-headlight-Suzuki-X90

How to replace the bulb of a Suzuki X90 headlight

Today there are a number of types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly put on the side now, and lots of bulbs LED . They consume less electricity and are more enduring. Regardless of the type of bulb, the way to replace them will be similar. Here is the logic to follow for replace the bulb in your Suzuki X90 .

  • Disconnect the battery in order to work more quietly.
  • Free access to the rear portion of the fire. It will sometimes be necessary to disassemble the battery, or covers.
  • Remove the rubber or plastic cover behind the fire
  • Unclip or unscrew the defective bulb of your Suzuki X90
  • Compare it with the new one to make sure it matches
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover and all of the components, following the reverse procedure

Once everything is in order, check that it works! This should have an intensity similar to the other. It is essential to have completely identical products.

How to properly adjust the headlights of a Suzuki X90

After replacing a light, it is possible that it will be out of order. It is very important that two lights at the same height and in the same axis. Among other things so as not to annoy the motorists you meet. That is why we must take the time to settle them properly. To do this, you must position your automobile in front of a wall. First a short distance, then a few meters. In the second time, it is enough to regulate the fire with the new bulb in the same way as the other according to the reflections on the wall. If the two are poorly adjusted, there are tutorials very well done on this subject.