Whether it's about the low beams, high beams or turn signals, the bulb replacement is an extremely easy to make . But if a fire never works, do not wait to change it. Because some people ignore it, but this is reprehensible by a fine which can go up to 68 euros. Obviously, it will first have to be repaired for security reasons. Here is how to change the headlight bulb on a Toyota 1000, step by step. Next, we will see how to properly adjust them.change-headlight-bulb-Toyota-1000

How to replace the bulb of a Toyota 1000 headlight

Today, there are several types of headlight bulbs. The most common are halogen , but there are also Xenon , somewhat neglected now, and lots of light bulbs LED . These are much less energy intensive and more robust. Regardless of the type of bulb, the way to replace them will be similar. So here is the procedure to follow for change the bulb in your Toyota 1000 .

  • Disconnect the battery in order to work more serenely.
  • Clear access to the rear part of the light. From time to time it will be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover on the back of the light
  • Unclip or unscrew the defective bulb from your Toyota 1000
  • Compare it well with the new one to make sure it fits
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover and all the elements following the reverse procedure

Once everything is in order, test the bulb! This should have an intensity similar to the other. It is essential to have totally similar products.

Adjusting the headlights of a Toyota 1000

After replacing a light, it is plausible that it will be out of order. It is extremely important that two lights at the same height and focused the same way. In particular not to hinder motorists in the other direction. It is therefore advisable to take the time to settle them properly. To do this, you must position your automobile in front of a wall. To start a short distance, then 5 or 6 meters. Thereafter, simply adjust the light with the new bulb to the same height as the other by comparing the halos. If neither of them goes, there are tutorials that can help you.