Whether it's for low beam, high beams or turn signals, the changing a light bulb is a very manipulation simple to make . But in the event that a fire no longer works, we must not wait to repair it. Because some people ignore it, but this is condemnable by a fine which can go up to 68 euros. Of course, it will first be necessary to change them for safety reasons. Here is therefore how to replace the bulb of a headlight on your Toyota 2000 Gt Mf 10, step by step. Subsequently, we will find out how to properly adjust them.
How to change the bulb of a Toyota 2000 Gt Mf 10 headlight
Nowadays, there are several types of headlight bulbs. The most common are halogen , but there are also Xenon , slightly put on the side now, and lots of bulbs LED . The latter are much less energy intensive and more enduring. Whatever the type of bulb, the way to change them will be similar. So here is the procedure to follow for replace the bulb of your Toyota 2000 Gt Mf 10 .
- Disconnect the battery in order to work more serenely.
- Free access to the rear part of the light. At times it will be necessary to disassemble the battery, or else covers.
- Remove the rubber or plastic cover on the back of the light
- Remove the fixing or unscrew the broken bulb of the Toyota 2000 Gt Mf 10
- Compare it with the new one to be sure it matches
- Place the new bulb gently, then fix it properly
- Replace the rubber cover and all the elements in the opposite direction
Now that everything is back in order, check that it works! The latter should have the same intensity as the other. It is essential to have completely identical products.
How to configure the headlights of a Toyota 2000 Gt Mf 10
Now that the fire is in place, it may be out of order. It is extremely important that two lights at the same height and focused in the same way. Among other things so as not to annoy the drivers in front. This is why we must take the time to adjust them properly. To do this, simply place your vehicle facing a wall. At first at a short distance, then at 5 or 6 meters. Subsequently, it suffices to adjust the light with the new bulb at the same height as the other by comparing the halos. If both are incorrectly set, there are tutorials that can help you.