Whether it's about the low beams, high beams or turn signals, the changing a light bulb is a very operation convenient to execute . But if a fire stops working, you should not wait to repair it. Because some people do not know it, but it remains reprehensible by a sanction which can go up to 68 euros. Of course, you will have to replace them for safety reasons first. Here is how you can replace the headlight bulb on your Toyota 4runner, step by step. In a second step, we will see how to correctly adjust them.change-headlight-bulb-Toyota-4runner

How to Replace a Toyota 4runner Headlight Bulb

Now there are a number of types of headlight bulbs. The most common are halogen , but we can also find Xenon , slightly put on the side now, and more and more bulbs LED . The latter are much less energy intensive and more enduring. Regardless of the type of bulb, the way to replace them will be similar. You will find below the logic to follow for replace the bulb in your Toyota 4runner .

  • Disconnect the battery in order to work more serenely.
  • Clear access to the rear part of the light. Sometimes it will be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover on the back of the light
  • Unclip or unscrew the damaged bulb from your Toyota 4runner
  • Compare it well with the new one to make sure it fits
  • Place the new bulb gently, then fix it correctly
  • Replace the rubber cover and all the components by following the reverse procedure.

Now that everything is back in order, check that it works! This one should have the same intensity as the other. It is essential to have totally similar products.

How to adjust the headlights of a Toyota 4runner

Now that the fire is in place, it is plausible that it is out of order. It is extremely important that two lights at the same height and in the same axis. Among other things so as not to annoy the drivers in the other direction. That is why they must be set correctly. For this, you just have to place your car in front of a wall. First a short distance, then a few meters. In a second step, you just have to adjust the light in question at the same height as the other by comparing the halos. If neither of them goes, there are tutorials very well done on this subject.