That it concerns low beam, high beams or turn signals, the changing a light bulb is a super repair easy to do . But if a fire stops working, it should not be long before replacing it. Because many ignore it, but this is punishable by a penalty which can go up to 68 euros. Of course, you will have to replace them first for safety reasons. Here is how to change the bulb of a headlight on a Toyota Auris 2, point by point. Then we will find out how to set them correctly.
How to replace the bulb of a Toyota Auris 2 headlight
Nowadays, there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly put on the side today, and more and more bulbs LED . They consume less electricity and are more enduring. Whatever the type of bulb, the way to replace them will be similar. So here is the procedure to follow for change the bulb of your Toyota Auris 2 .
- Disconnect the battery in order to work more serenely.
- Free access to the rear part of the light. It will be necessary to dismantle the battery from time to time, or covers.
- Remove the rubber or plastic cover behind the fire
- Remove the fixing or unscrew the defective bulb from the Toyota Auris 2
- Compare it with the new one to be sure it is suitable
- Place the new bulb gently, then fix it properly
- Replace the rubber cover and all the elements in the other direction
Now that everything is in place, check that it works! This one should have the same intensity as the other. It is important to have completely identical products.
How to adjust the headlights of a Toyota Auris 2
Now that the fire is in place, it is plausible that it is out of order. It is extremely important that two lights at the same height and in the same axis. In particular not to annoy the conductors in the other direction. They should therefore be adjusted correctly. To do this, simply place your automobile in front of a wall. To start a short distance, then a few meters. Then, you just have to adjust the fire with the new bulb in the same way as the other according to the reflections on the wall. If neither of them goes, we find tutorials very well done on this subject.