That it concerns low beam, high beams or turn signals, the bulb replacement is an extremely repair convenient to do . But if a fire does not work, it must not be long before changing it. Because some people do not know it, but this is punishable by a fine which can go up to 68 euros. Of course, you must first replace them for safety reasons. So here is how to replace the headlight bulb on your Toyota Avensis 3, step by step. Next, we will find out how to properly adjust them.
How to replace the bulb of a Toyota Avensis 3 headlight
Today there are various types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly neglected today, and lots of bulbs LED . These are much less energy consuming and more robust. Whatever the type of bulb, the way to replace them will be identical. So that's the logic to follow for replace the bulb in your Toyota Avensis 3 .
- Disconnect the battery in order to work more serenely.
- Free access to the rear part of the light. It will sometimes be necessary to remove the battery, or else covers.
- Remove the rubber or plastic cover on the back of the light
- Remove the fixing or unscrew the damaged bulb from the Toyota Avensis 3
- Compare it with the new one to make sure it fits
- Place the new bulb gently, then fix it properly
- Replace the rubber cover then all the elements following the reverse procedure
Now that everything is in place, check that it works! The latter should have an intensity equal to the other. It is essential to have completely identical products.
How to properly configure the headlights of a Toyota Avensis 3
After replacing a light, it is possible that it will be out of order. It is very important that two lights at the same height and in the same axis. Among other things so as not to hinder motorists in the other direction. That is why they must be settled properly. To do this, simply place your automobile facing a wall. To start one meter from the wall, then a few meters. Thereafter, you will just have to adjust the fire with the new bulb in the same way as the other by comparing the halos. If the two are poorly adjusted, there are tutorials very well done on this subject.