That it concerns low beam, high beams or turn signals, the bulb replacement is an extremely repair simple to do . But if a fire does not work, do not delay in replacing it. Because some people do not know it, but it remains punishable by a fine of up to 68 euros. Of course, you are going to have to start changing them for safety reasons. Here is how to replace the headlight bulb on the Toyota Avensis Verso, step by step. In a second step, we will find out how to properly resolve them.changing-headlight-bulb-Toyota-Avensis-Verso

How to replace a Toyota Avensis Verso headlight bulb

Nowadays, there are a number of types of headlight bulbs. The most common are halogen , however we can also find Xenon , a little put on the side now, and a lot of bulbs LED . These are less energy intensive and more enduring. Whatever the type of bulb, the way to replace them will be similar. Here is the procedure to follow for replace the bulb in your Toyota Avensis Verso .

  • Disconnect the battery so that you can work more quietly.
  • Clear access to the rear part of the light. It will be necessary to dismantle the battery from time to time, or covers.
  • Remove the rubber or plastic cover behind the fire
  • Remove the fixing or unscrew the damaged bulb from your Toyota Avensis Verso
  • Compare it well with the new one to be sure that it is suitable
  • Position the new bulb gently, then fix it properly
  • Reclip the rubber cover and all components in reverse order

Once everything is in order, check that it works! This one should have the same intensity as the other. It is essential to have completely identical models.

Configure the headlights of a Toyota Avensis Verso

After replacing a light, it is plausible that it will be out of order. It is extremely important that two lights at the same height and in the same axis. Among other things so as not to annoy motorists in the other direction. It is therefore advisable to take the time to settle them properly. To do this, you must place your automobile facing a wall. First one meter from the wall, then 5 or 6 meters. In a second step, it is enough to adjust the light in question at the same height as the other by comparing the halos. If the two are wrong, there are tutorials that can help.