Whether it's for low beam, high beams or turn signals, the changing a light bulb is a very manipulation simple to do . But when a fire no longer works, it should not be delayed to replace it. Because many do not know it, but this remains punishable by a fine of up to 68 euros. Obviously, it will be necessary to change them to start for safety reasons. So here's how to replace the headlight bulb on a Toyota Aygo 2, step by step. Subsequently, we will see how to properly adjust them.
How to replace the bulb of a Toyota Aygo 2 headlight
Today, there are a number of types of headlight bulbs. The most common are halogen , however we can also find Xenon , slightly neglected now, and lots of bulbs LED . These are less energy intensive and more resistant. Regardless of the type of bulb, the way to replace them will be the same. Here is the logic to follow for replace the bulb of your Toyota Aygo 2 .
- Disconnect the battery in order to work more comfortably.
- Clear access to the rear portion of the light. At times it will be necessary to remove the battery, or covers.
- Remove the rubber or plastic cover behind the fire
- Remove the fixing or unscrew the broken bulb of the Toyota Aygo 2
- Compare it with the news to make sure it fits
- Place the new bulb gently, then fix it properly
- Reclip the rubber cover then all the components in reverse
Now that everything is in place, check that it works! This one should have the same intensity as the other. It is essential to have completely similar models.
How to configure the headlights of a Toyota Aygo 2
After replacing a light, it is plausible that it will be out of order. It is extremely important that two lights at the same height and in the same axis. In particular so as not to annoy the motorists that you meet. It is therefore advisable to take the time to adjust them properly. To do this, you must place your vehicle facing a wall. At first one meter from the wall, then a few meters. Subsequently, it suffices to adjust the fire in question to the same height as the other according to the reflections on the wall. If neither of the two works, there are some very well done tutorials on this.