That it concerns low beam, high beams or turn signals, the changing a light bulb is a super repair easy to make . But if a fire does not work, it should not be long before replacing it. Because some people forget it, but this is condemnable by a fine of up to 68 euros. Naturally, it is first of all necessary to repair them for safety reasons. Here is how to replace the headlight bulb on a Toyota Aygo, step by step. In a second step, we will see how to properly adjust them.change-headlight-bulb-Toyota-Aygo

How to change the bulb of a Toyota Aygo headlight

Nowadays, there are various types of headlight bulbs. The most common are halogen , however there are also Xenon , a little put on the side now, and more and more bulbs LED . These are less energy consuming and more robust. Whatever the type of bulb, the way to change them will be similar. You will find below the procedure to follow for replace the bulb in your Toyota Aygo .

  • Disconnect the battery so that you can work more quietly.
  • Clear access to the rear portion of the light. It will sometimes be necessary to disassemble the battery, or else covers.
  • Remove the rubber or plastic cover on the back of the light
  • Unclip or unscrew the damaged bulb from the Toyota Aygo
  • Compare it with the news to make sure it matches
  • Position the new bulb gently, then fix it properly
  • Reclip the rubber cover and all of the elements by following the reverse procedure

Now that everything is in place, test the bulb! The latter should have the same intensity as the other. It is essential to have totally similar products.

Configure the headlights of a Toyota Aygo

After replacing a light, it is possible that it will be out of order. It is extremely important that two lights at the same height and focused the same way. Among other things so as not to hinder motorists in the other direction. They should therefore be adjusted properly. To do this, you must position your vehicle in front of a wall. First a short distance, then a few meters. In a second step, simply adjust the fire with the new bulb at the same height as the other according to the reflections on the wall. If neither goes, there are tutorials that can help.