Whether it's for low beam, high beams or turn signals, the bulb replacement is a very operation convenient to execute . But if a fire does not work, it should not be long to repair it. Because some people forget it, but this is punishable by a penalty of up to 68 euros. Obviously, you will have to repair them first for security reasons. Here is therefore how to replace the headlight bulb on the Toyota Camry 3, point by point. Next, we will find out how to set them correctly.change-headlight-bulb-Toyota-Camry-3

How to replace the bulb of a Toyota Camry 3 headlight

Nowadays, there are a number of types of headlight bulbs. The most common are halogen , however we can also find Xenon , a little put on the side now, and more and more bulbs LED . The latter are much less greedy in electricity and more robust. Regardless of the type of bulb, the way to replace them will be the same. You will find below the logic to follow in order to replace the bulb in your Toyota Camry 3 .

  • Disconnect the battery so that you can work more comfortably.
  • Free access to the rear part of the light. It will sometimes be necessary to disassemble the battery, or covers.
  • Remove the rubber or plastic cover on the back of the fire
  • Unclip or unscrew the broken bulb of your Toyota Camry 3
  • Compare it well with the new one to be sure that it is suitable
  • Place the new bulb gently, then fix it properly
  • Reclip the rubber cover and all the elements in the opposite direction

Now that everything is back in order, check that it works! This should have an intensity similar to the other. It is essential to have totally similar products.

Adjusting the headlights of a Toyota Camry 3

Now that the fire is in place, it is plausible that it is out of order. It is extremely important that two lights at the same height and in the same axis. In particular not to annoy motorists in the other direction. They must therefore be set correctly. To do this, simply place your vehicle in front of a wall. First a short distance, then 5 or 6 meters. Thereafter, simply adjust the light in question to the same height as the other according to the reflections on the wall. If the two are wrong, there are tutorials that can help.