Whether it's for low beam, high beams or turn signals, the bulb replacement is an extremely repair convenient to make . But if a light doesn't work, don't wait to replace it. Because many ignore it, but it remains condemnable by a fine of up to 68 euros. Of course, you will need to change them to start for safety reasons. Here is therefore how to replace the headlight bulb on your Toyota Camry 5, point by point. In a second step, we will find out how to properly adjust them.change-headlight-bulb-Toyota-Camry-5

How to change the bulb of a Toyota Camry 5 headlight

Nowadays, there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , a little neglected today, and a lot of bulbs LED . They consume much less electricity and are more resistant. No matter what kind of bulb, the way to change them will be the same. You will find below the procedure to follow to replace the bulb in your Toyota Camry 5 .

  • Disconnect the battery in order to work more serenely.
  • Clear access to the rear part of the light. Sometimes it will be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover on the back of the fire
  • Remove the fixing or unscrew the broken bulb from your Toyota Camry 5
  • Compare it with the news to make sure it matches
  • Position the new bulb gently, then fix it properly
  • Replace the rubber cover then all the components in reverse

Now that everything is in place, check that it works! The latter should have an intensity similar to the other. It is essential to have totally similar models.

How to adjust the headlights of a Toyota Camry 5

Now that the fire is in place, it is plausible that it is out of order. It is extremely important that two lights at the same height and in the same axis. Notably so as not to annoy motorists in front. They must therefore be properly adjusted. To do this, you must position your vehicle in front of a wall. First a short distance, then a few yards. Secondly, it suffices to adjust the fire in question in the same way as the other by comparing the halos. If both are incorrectly set, there are tutorials that can help you.