Whether it's about the low beams, high beams or turn signals, the changing a light bulb is an extremely convenient to do . But if a fire never works, you should not wait to change it. Because some people forget it, but it is reprehensible by a sanction which can go up to 68 euros. Obviously, it will be necessary above all to change them for security reasons. So that's how to replace the headlight bulb on your Toyota Camry, point by point. In a second step, we will see how to properly adjust them.
How to Replace a Toyota Camry Headlight Bulb
Nowadays, there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , a little put on the side today, and more and more bulbs LED . The latter consume less electricity and are more robust. Regardless of the type of bulb, the way to replace them will be similar. So here is the logic to follow in order to replace the bulb in your Toyota Camry .
- Disconnect the battery so that you can work more quietly.
- Clear access to the rear portion of the light. Sometimes it will be necessary to remove the battery, or else covers.
- Remove the rubber or plastic cover behind the fire
- Unclip or unscrew the damaged bulb from the Toyota Camry
- Compare it with the news to make sure it is suitable
- Place the new bulb gently, then fix it properly
- Replace the rubber cover and all the elements in reverse order
Now that everything is in order, test the bulb! The latter should have the same intensity as the other. It is essential to have perfectly similar models.
How to set the headlights of a Toyota Camry
After replacing a light, it is plausible that it will be out of order. It is very important that two lights at the same height and focused the same way. Among other things so as not to disturb the conductors opposite. That is why they must be settled properly. To do this, simply position your car in front of a wall. First a short distance, then 5 or 6 meters. In a second step, you will just have to adjust the fire in question in the same way as the other according to the reflections on the wall. If neither of them goes, there are tutorials very well done on this subject.