That it concerns low beam, high beams or turn signals, the bulb replacement is a very repair simple to do . But in the event that a light does not work, it should not be delayed to change it. Because some people do not know it, but it is condemnable by a fine which can go up to 68 euros. Of course, it will be necessary to replace them to begin with for safety reasons. Here is therefore how to replace the bulb of a headlight on a Toyota Corolla 5, step by step. Second, we will find out how to properly adjust them.change-headlight-bulb-Toyota-Corolla-5

How to replace a Toyota Corolla 5 headlight bulb

Nowadays, there are a number of types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly put on the side now, and lots of bulbs LED . These consume less energy and are more enduring. Whatever the type of bulb, the way to replace them will be the same. Here is the logic to follow in order to replace the bulb in your Toyota Corolla 5 .

  • Disconnect the battery so that you can work more serenely.
  • Clear access to the rear part of the light. From time to time it will be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover behind the fire
  • Unclip or unscrew the broken bulb from your Toyota Corolla 5
  • Compare it well with the new one to make sure it fits
  • Place the new bulb gently, then fix it correctly
  • Reclip the rubber cover and all the components in the other direction

Now that everything is back in order, check that it works! This one should display a similar intensity to the other. It's important to have perfectly similar products.

Correctly adjusting the headlights of a Toyota Corolla 5

Now that the fire is in place, it is plausible that it is out of order. It is extremely important that two lights at the same height and in the same axis. In particular so as not to upset the motorists that you meet. It is therefore advisable to take the time to adjust them correctly. To do this, simply position your vehicle in front of a wall. First a meter from the wall, then a few meters. In the second place, you will just have to adjust the fire in question in the same way as the other according to the reflections on the wall. If neither of the two works, there are tutorials that can help you.