Whether it's for low beam, high beams or turn signals, the bulb replacement is an extremely manipulation easy to do . But when a fire no longer works, it should not be delayed to replace it. Because some people are unaware of it, but this is reprehensible by a sanction which can go up to 68 euros. Of course, you will have to repair them first for safety reasons. Here is therefore how to replace the headlight bulb on your Toyota Corolla 6, step by step. Second, we will see how to properly adjust them.
How to change the bulb of a Toyota Corolla 6 headlight
Nowadays, there are various types of headlight bulbs. The most common are halogen , however there are also Xenon , somewhat put on the side now, and more and more bulbs LED . The latter are much less greedy in electricity and more robust. Whatever the type of bulb, the way to change them will be similar. You will find below the procedure to follow in order to replace the bulb in your Toyota Corolla 6 .
- Disconnect the battery in order to work more serenely.
- Free access to the rear part of the light. It will sometimes be necessary to remove the battery, or else covers.
- Remove the rubber or plastic cover on the back of the light
- Remove the fixing or unscrew the defective bulb of the Toyota Corolla 6
- Compare it with the news to make sure it is suitable
- Place the new bulb gently, then fix it properly
- Replace the rubber cover then all the elements in the other direction
Now that everything is back in order, test the bulb! The latter should have the same intensity as the other. It's important to have perfectly similar products.
Correctly adjusting the headlights of a Toyota Corolla 6
After replacing a light, it remains plausible that it will be out of order. It is extremely important that two lights at the same height and in the same axis. Among other things so as not to annoy the drivers in the other direction. This is why we must take the time to adjust them properly. To do this, you just have to place your car facing a wall. First a meter from the wall, then a few meters. Second, it suffices to adjust the light with the new bulb in the same way as the other by comparing the halos. If neither of the two works, there are some very well-done tutorials on this.