Whether it's about the low beams, high beams or turn signals, the bulb replacement is a very operation convenient to perform . But if a fire does not work, you should not delay in changing it. Because some people forget it, but it remains condemnable by a ticket which can go up to 68 euros. Of course, it will first have to be repaired for safety reasons. This is how you can replace the headlight bulb on your Toyota Corolla 7, step by step. In a second step, we will find out how to properly resolve them.change-headlight-bulb-Toyota-Corolla-7

How to replace a Toyota Corolla 7 headlight bulb

Now there are several types of headlight bulbs. The most common are halogen , but there are also Xenon , a little put on the side now, and more and more bulbs LED . They consume less electricity and are more enduring. Whatever the type of bulb, the way to replace them will be similar. You will find below the logic to follow in order to replace the bulb in your Toyota Corolla 7 .

  • Disconnect the battery so that you can work more comfortably.
  • Free access to the rear portion of the fire. Sometimes it will be necessary to remove the battery, or else covers.
  • Remove the rubber or plastic cover behind the fire
  • Remove the fixing or unscrew the damaged bulb from the Toyota Corolla 7
  • Compare it with the new one to be sure it is suitable
  • Position the new bulb gently, then fix it properly
  • Reclip the rubber cover then all the components in the other direction

Now that everything is in order, test the bulb! This one should display the same intensity as the other. It is essential to have perfectly similar models.

Configure the headlights of a Toyota Corolla 7

After replacing a light, it remains plausible that it will be out of order. It is very important that two lights at the same height and focused the same way. Among other things so as not to hinder motorists in the other direction. So take the time to settle them properly. To do this, simply place your vehicle facing a wall. First a short distance, then a few meters. In a second step, you will just have to adjust the fire in question in the same way as the other by comparing the halos. If the two are wrong, there are tutorials that can help.