Whether it's about the low beams, high beams or turn signals, the changing a light bulb is an extremely simple to execute . But when a fire stops working, you should not wait to repair it. Because many do not know it, but this is condemnable by a fine of up to 68 euros. Naturally, you will have to replace them first for security reasons. Here is how to change the bulb of a headlight on your Toyota Corolla 9 Ts, point by point. In the second step, we will find out how to set them correctly.change-bulb-headlight-Toyota-Corolla-9-Ts

How to replace the bulb of a Toyota Corolla 9 Ts headlight

Nowadays, there are a number of types of headlight bulbs. The most common are halogen , however we can also find Xenon , somewhat put on the side now, and more and more bulbs LED . These are less energy consuming and more resistant. Regardless of the type of bulb, the way to replace them will be similar. Here is the logic to follow for change the bulb in your Toyota Corolla 9 Ts .

  • Disconnect the battery so that you can work more quietly.
  • Free access to the rear part of the light. At times it will be necessary to remove the battery, or else covers.
  • Remove the rubber or plastic cover behind the fire
  • Remove the fixing or unscrew the defective bulb from the Toyota Corolla 9 Ts
  • Compare it with the new one to be sure it matches
  • Place the new bulb gently, then fix it correctly
  • Reclip the rubber cover then all the elements in the other direction

Once everything is in order, test the bulb! This one should have an intensity equal to the other. It is important to have perfectly similar models.

How to adjust the headlights of a Toyota Corolla 9 Ts

After replacing a light, it is possible that it will be out of order. It is extremely important that two lights at the same height and focused the same way. In particular not to annoy the conductors in the other direction. So take the time to adjust them correctly. To do this, simply place your automobile in front of a wall. To start one meter from the wall, then 5 or 6 meters. In a second step, it is enough to adjust the fire with the new bulb at the same height as the other by comparing the halos. If neither goes, there are tutorials that can help you.