That it concerns low beam, high beams or turn signals, the bulb replacement is a very repair easy to execute . But in the event that a light does not work, it should not be delayed to replace it. Because many ignore it, but it remains condemnable by a sanction of up to 68 euros. Of course, it will be necessary above all to change them for safety reasons. This is how to change the headlight bulb on your Toyota Corolla 9, step by step. In a second step, we will see how to correctly adjust them.change-headlight-bulb-Toyota-Corolla-9

How to change the bulb of a Toyota Corolla 9 headlight

Today, there are a number of types of headlight bulbs. The most common are halogen , but we can also find Xenon , slightly put on the side now, and more and more bulbs LED . The latter consume much less electricity and are more enduring. Regardless of the type of bulb, the way to change them will be similar. So this is the logic to follow in order to change the bulb of your Toyota Corolla 9 .

  • Disconnect the battery so that you can work more serenely.
  • Clear access to the rear portion of the light. It will sometimes be necessary to disassemble the battery, or covers.
  • Remove the rubber or plastic cover on the back of the fire
  • Remove the fixing or unscrew the defective bulb of the Toyota Corolla 9
  • Compare it well with the new one to make sure it matches
  • Position the new bulb gently, then fix it correctly
  • Replace the rubber cover and all the components in the other direction

Once everything is in place, test the bulb! The latter should have the same intensity as the other. It is important to have perfectly identical models.

How to set the headlights of a Toyota Corolla 9

Now that the fire is in place, it is possible that the latter is out of order. It is extremely important that two lights at the same height and focused in the same way. Among other things, so as not to upset the motorists you meet. This is why you have to take the time to adjust them correctly. To do this, all you have to do is place your car facing a wall. First one meter from the wall, then five or six meters. Secondly, you just have to adjust the light in question to the same height as the other by comparing the halos. If both are wrongly set, there are some very well-made tutorials on this subject.