Whether it's for low beam, high beams or turn signals, the bulb replacement is an extremely manipulation easy to do . But if a fire no longer works, it should not be long before it is changed. Because many do not know it, but it is condemnable by a fine which can go up to 68 euros. Obviously, it will be necessary above all to change them for security reasons. Here is therefore how to change the headlight bulb on the Toyota Corolla Verso 2, step by step. In the second step, we will find out how to set them correctly.
How to change the bulb of a Toyota Corolla Verso 2 headlight
Nowadays, there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , somewhat neglected now, and lots of bulbs LED . They consume much less electricity and are more robust. No matter what kind of bulb, the way to change them will be similar. Here is the procedure to follow in order to change the bulb in your Toyota Corolla Verso 2 .
- Disconnect the battery to work more comfortably.
- Free access to the rear portion of the fire. It will sometimes be necessary to disassemble the battery, or covers.
- Remove the rubber or plastic cover on the back of the fire
- Unclip or unscrew the damaged bulb from the Toyota Corolla Verso 2
- Compare it with the news to make sure it fits
- Put the new bulb down gently, then fix it correctly
- Reclip the rubber cover and all the components in the other direction
Now that everything is in order, check that it works! The latter should display an intensity equal to the other. It is essential to have perfectly similar products.
How to set the headlights of a Toyota Corolla Verso 2
Now that the fire is in place, it remains possible that it is out of order. It is very important that two lights at the same height and focused the same way. In particular not to annoy the conductors opposite. So take the time to adjust them correctly. To do this, simply position your car in front of a wall. First a short distance, then 5 or 6 meters. In a second step, you will just have to adjust the fire with the new bulb at the same height as the other by comparing the halos. If the two are poorly adjusted, there are tutorials very well done on this subject.