Whether it's about the low beams, high beams or turn signals, the bulb replacement is a super manipulation easy to do . But if a fire never works, do not wait to change it. Because many do not know it, but it is condemnable by a fine which can go up to 68 euros. Of course, you must first change them for security reasons. Here is how to replace the headlight bulb on a Toyota Corolla Verso, step by step. Then we will find out how to properly adjust them.changing-headlight-bulb-Toyota-Corolla-Verso

How to change the bulb of a Toyota Corolla Verso headlight

Nowadays, there are several types of headlight bulbs. The most common are halogen , but there are also Xenon , somewhat neglected now, and lots of light bulbs LED . They consume much less electricity and are more resistant. Whatever the type of bulb, the way to change them will be identical. Here is the procedure to follow in order to replace the bulb in your Toyota Corolla Verso .

  • Disconnect the battery so that you can work more comfortably.
  • Clear access to the rear portion of the light. It will sometimes be necessary to remove the battery, or else covers.
  • Remove the rubber or plastic cover behind the fire
  • Remove the fixing or unscrew the defective bulb from your Toyota Corolla Verso
  • Compare it well with the new one to be sure it matches
  • Position the new bulb gently, then fix it properly
  • Replace the rubber cover and then all of the components in reverse order

Once everything is in place, check that it works! The latter should have an intensity similar to the other. It is important to have completely similar products.

How to adjust the headlights of a Toyota Corolla Verso

After replacing a light, it is plausible that it will be out of order. It is very important that two lights at the same height and focused the same way. Among other things so as not to annoy the motorists you meet. They must therefore be settled properly. To do this, simply position your automobile in front of a wall. To start one meter from the wall, then 5 or 6 meters. Then just adjust the fire with the new bulb in the same way as the other by comparing the halos. If the two are poorly adjusted, there are tutorials very well done on this subject.