Whether it's for low beam, high beams or turn signals, the changing a light bulb is an extremely simple to perform . But if a fire does not work, it should not be long to repair it. Because many forget it, but it remains condemnable by a fine which can go up to 68 euros. Obviously, you will first have to change them for safety reasons. Here is therefore how to change the bulb of a headlight on a Toyota Corona, step by step. In a second step, we will see how to correctly adjust them.
How to Replace a Toyota Corona Headlight Bulb
Today, there are a number of types of headlight bulbs. The most common are halogen , however there are also Xenon , somewhat neglected now, and more and more light bulbs LED . The latter consume less electricity and are more resistant. Whatever the type of bulb, the way to replace them will be identical. You will find below the procedure to follow for change the bulb of your Toyota Corona .
- Disconnect the battery to work more comfortably.
- Clear access to the rear portion of the light. At times it will be necessary to disassemble the battery, or covers.
- Remove the rubber or plastic cover on the back of the light
- Remove the fixing or unscrew the broken bulb from your Toyota Corona
- Compare it well with the new one to be sure that it is suitable
- Place the new bulb gently, then fix it correctly
- Replace the rubber cover and all the elements in reverse order
Now that everything is in order, test the bulb! This one should display the same intensity as the other. It is essential to have totally similar models.
Configure the headlights of a Toyota Corona
Now that the fire is in place, it is plausible that the latter is out of order. It is very important that two lights at the same height and in the same axis. Among other things so as not to disturb motorists opposite. They must therefore be set correctly. To do this, simply position your automobile facing a wall. First one meter from the wall, then a few meters. Secondly, just set the fire in question in the same way as the other according to the reflections on the wall. If neither of them goes, there are tutorials that can help you.