Whether it's about the low beams, high beams or turn signals, the bulb replacement is a very manipulation simple to execute . But in case a fire does not work, it should not be long to replace it. Because some people forget it, but it remains condemnable by a penalty which can go up to 68 euros. Obviously, it is necessary to first replace them for safety reasons. So here is how to replace the headlight bulb on your Toyota Cressida, point by point. In a second step, we will see how to correctly adjust them.
How to change the bulb of a Toyota Cressida headlight
Nowadays, there are several types of headlight bulbs. The most common are halogen , but we can also find Xenon , a little put on the side today, and a lot of bulbs LED . They consume less electricity and are more robust. No matter what kind of bulb, the way to change them will be similar. Here is the procedure to follow in order to replace the bulb in your Toyota Cressida .
- Disconnect the battery so that you can work more serenely.
- Clear access to the rear portion of the light. At times it will be necessary to remove the battery, or covers.
- Remove the rubber or plastic cover on the back of the light
- Unclip or unscrew the defective bulb from your Toyota Cressida
- Compare it with the news to make sure it fits
- Position the new bulb gently, then fix it correctly
- Replace the rubber cover and all the components, following the reverse procedure
Now that everything is in order, check that it works! The latter should display an intensity equal to the other. It is important to have completely identical products.
How to set the headlights of a Toyota Cressida
Now that the fire is in place, it is possible that the latter is out of order. It is extremely important that two lights at the same height and focused the same way. Among other things so as not to annoy motorists in the other direction. So take the time to adjust them correctly. To do this, you just have to place your vehicle in front of a wall. To start one meter from the wall, then 5 or 6 meters. In the second time, it is enough to regulate the fire with the new bulb in the same way as the other by comparing the halos. If the two are poorly tuned, there are very good tutorials on this.