Whether it's for low beam, high beams or turn signals, the bulb replacement is a super repair simple to execute . But if a light no longer works, you should not wait to change it. Because many do not know it, but that remains reprehensible by a fine which can go up to 68 euros. Obviously, it is necessary to first repair them for safety reasons. So that's how to replace the headlight bulb on your Toyota Crown, point by point. In a second step, we will see how to correctly adjust them.
How to change the bulb of a Toyota Crown headlight
Today, there are various types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly put on the side now, and lots of bulbs LED . These are much less energy consuming and more robust. Whatever the type of bulb, the way to change them will be similar. Here is the logic to follow in order to replace the bulb in your Toyota Crown .
- Disconnect the battery in order to work more serenely.
- Clear access to the rear part of the light. At times it will be necessary to disassemble the battery, or else covers.
- Remove the rubber or plastic cover on the back of the light
- Unclip or unscrew the damaged bulb from the Toyota Crown
- Compare it with the new one to be sure it is suitable
- Place the new bulb gently, then fix it properly
- Replace the rubber cover and all the elements following the reverse procedure.
Now that everything is in place, test the bulb! The latter should have an intensity similar to the other. It is important to have completely similar models.
Adjusting the headlights of a Toyota Crown
After replacing a light, it is possible that it will be out of order. It is very important that two lights at the same height and in the same axis. In particular not to annoy the motorists opposite. They must therefore be set correctly. To do this, simply place your automobile facing a wall. To start one meter from the wall, then 5 or 6 meters. In a second step, you just have to adjust the fire in question in the same way as the other according to the reflections on the wall. If neither goes, there are tutorials that can help you.