Whether it's for low beam, high beams or turn signals, the bulb replacement is a super operation convenient to perform . But when a fire does not work, do not wait to repair it. Because some people ignore it, but this is punishable by a penalty of up to 68 euros. Of course, you will first have to change them for safety reasons. Here is therefore how to change the bulb of a headlight on the Toyota Dyna, point by point. Second, we will find out how to properly fix them.change-bulb-headlight-Toyota-Dyna

How to replace a Toyota Dyna headlight bulb

Now there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly put on the side now, and lots of bulbs LED . They consume less electricity and are more robust. Whatever the type of bulb, the way to replace them will be identical. You will find below the procedure to follow for change the bulb of your Toyota Dyna .

  • Disconnect the battery so that you can work more serenely.
  • Clear access to the rear part of the light. From time to time it will be necessary to disassemble the battery, or covers.
  • Remove the rubber or plastic cover on the back of the fire
  • Remove the fixing or unscrew the broken bulb from your Toyota Dyna
  • Compare it with the new one to make sure it matches
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover and all the elements in the other direction

Once everything is in place, test the bulb! This should display an intensity similar to the other. It is essential to have completely identical models.

How to set the headlights of a Toyota Dyna

Now that the fire is in place, it remains plausible that it is out of order. It is very important that two lights at the same height and in the same axis. In particular so as not to obstruct the conductors in the other direction. That is why they must be settled properly. To do this, simply place your car facing a wall. First a short distance, then 5 or 6 meters. Second, just set the fire with the new bulb in the same way as the other by comparing the halos. If neither goes, there are tutorials very well on this subject.