Whether it's about the low beams, high beams or turn signals, the bulb replacement is a very repair easy to perform . But if a fire never works, it should not be long before replacing it. Because many ignore it, but this is condemnable by a fine which can go up to 68 euros. Of course, it will first of all have to be repaired for safety reasons. Here is therefore how to replace the headlight bulb on the Toyota Es3, step by step. In a second step, we will find out how to properly resolve them.
How to change the bulb of a Toyota Es3 headlight
Now there are a number of types of headlight bulbs. The most common are halogen , however there are also Xenon , somewhat neglected now, and more and more bulbs LED . They consume less electricity and are more resistant. Whatever kind of bulb, the way to change them will be similar. Here is the procedure to follow in order to replace the bulb in your Toyota Es3 .
- Disconnect the battery to work more comfortably.
- Clear access to the rear portion of the light. From time to time it will be necessary to disassemble the battery, or covers.
- Remove the rubber or plastic cover behind the fire
- Remove the fixing or unscrew the defective bulb from your Toyota Es3
- Compare it well with the new one to make sure it is suitable
- Position the new bulb gently, then fix it properly
- Replace the rubber cover and all the elements following the reverse procedure
Now that everything is in order, test the bulb! This one should have the same intensity as the other. It is essential to have totally similar models.
How to adjust the headlights of a Toyota Es3
Now that the fire is in place, it may be out of order. It is extremely important that two lights at the same height and in the same axis. In particular not to annoy motorists opposite. It is therefore advisable to take the time to settle them properly. To do this, you just have to position your vehicle facing a wall. To start a short distance, then a few meters. In a second step, it is enough to adjust the fire in question at the same height as the other according to the reflections on the wall. If neither goes, there are very good tutorials on this.