Whether it's about the low beams, high beams or turn signals, the changing a light bulb is an extremely repair easy to make . But when a fire no longer works, you should not wait to change it. Because many do not know it, but this is reprehensible by a sanction which can go up to 68 euros. Obviously, they must first be replaced for safety reasons. Here is how to replace the headlight bulb on a Toyota Fine-n, step by step. In a second step, we will find out how to set them correctly.
How to change the bulb of a Toyota Fine-n headlight
Today, there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , somewhat put on the side today, and a lot of bulbs LED . They consume less electricity and are more resistant. Whatever the type of bulb, the way to change them will be similar. Here is the procedure to follow for replace the bulb in your Toyota Fine-n .
- Disconnect the battery in order to work more serenely.
- Free access to the rear part of the light. Sometimes it will be necessary to remove the battery, or covers.
- Remove the rubber or plastic cover on the back of the light
- Remove the fixing or unscrew the damaged bulb from your Toyota Fine-n
- Compare it with the news to make sure it fits
- Position the new bulb gently, then fix it correctly
- Reclip the rubber cover and all the elements in the opposite direction
Now that everything is in place, test the bulb! The latter should have an intensity similar to the other. It is important to have perfectly similar models.
Configure the headlights of a Toyota Fine-n
Now that the fire is in place, it is possible that it is out of order. It is very important that two lights at the same height and focused the same way. Among other things so as not to upset the drivers you meet. They must therefore be set correctly. To do this, you just have to position your vehicle facing a wall. To start a short distance, then 5 or 6 meters. In a second step, you will just have to adjust the fire with the new bulb in the same way as the other by comparing the halos. If neither of them goes, we find tutorials very well done on this subject.