Whether it's about the low beams, high beams or turn signals, the bulb replacement is a super manipulation simple to perform . But if a fire does not work, you should not delay in changing it. Because some people forget it, but it is punishable by a penalty of up to 68 euros. Obviously, they will first have to be changed for safety reasons. Here is therefore how to replace the headlight bulb on a Toyota Fj Cruiser, step by step. Secondly, we will see how to correctly adjust them.
How to change the bulb of a Toyota Fj Cruiser headlight
Today, there are several types of headlight bulbs. The most common are halogen , however we can also find Xenon , slightly neglected today, and lots of bulbs LED . These are much less energy consuming and more resistant. Regardless of the type of bulb, the way to change them will be similar. So that's the logic to follow for replace the bulb in your Toyota Fj Cruiser .
- Disconnect the battery in order to work more serenely.
- Clear access to the rear part of the light. Sometimes it will be necessary to remove the battery, or else covers.
- Remove the rubber or plastic cover on the back of the light
- Unclip or unscrew the defective bulb from the Toyota Fj Cruiser
- Compare it well with the new one to make sure it fits
- Position the new bulb gently, then fix it correctly
- Replace the rubber cover then all the elements following the reverse procedure
Once everything is in place, check that it works! The latter should display the same intensity as the other. It is essential to have perfectly similar products.
How to properly configure the headlights of a Toyota Fj Cruiser
Now that the fire is in place, it remains plausible that the latter is out of order. It is extremely important that two lights at the same height and focused the same way. Among other things so as not to upset the drivers you meet. That's why you have to take the time to adjust them correctly. To do this, you must place your vehicle in front of a wall. First one meter from the wall, then a few meters. In the second place, it is enough to regulate the fire with the new bulb in the same way as the other according to the reflections on the wall. If neither of them goes, there are tutorials that can help you.