That it concerns low beam, high beams or turn signals, the changing a light bulb is a very manipulation convenient to execute . But if a fire never works, do not wait to repair it. Because many do not know, but it is punishable by a penalty of up to 68 euros. Of course, they must first be changed for security reasons. This is therefore how to replace the headlight bulb on the Toyota Ft-hs, point by point. Then we will see how to properly adjust them.change-headlight-bulb-Toyota-Ft-hs

How to replace the bulb of a Toyota Ft-hs headlight

Nowadays, there are several types of headlight bulbs. The most common are halogen , however we can also find Xenon , a little neglected now, and a lot of bulbs LED . They consume much less electricity and are more enduring. Regardless of the type of bulb, the way to replace them will be similar. Here is the logic to follow for replace the bulb in your Toyota Ft-hs .

  • Disconnect the battery in order to work more comfortably.
  • Free access to the rear portion of the fire. It will sometimes be necessary to remove the battery, or else covers.
  • Remove the rubber or plastic cover behind the fire
  • Unclip or unscrew the broken bulb of the Toyota Ft-hs
  • Compare it well with the new one to be sure it fits
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover then all the elements in the other direction

Now that everything is in place, check that it works! The latter should display an intensity equal to the other. It is important to have completely similar products.

How to adjust the headlights of a Toyota Ft-hs

After replacing a light, it is still possible that it will be out of order. It is very important that two lights at the same height and in the same axis. Among other things so as not to upset the drivers you meet. So take the time to settle them properly. To do this, simply position your automobile in front of a wall. First a short distance, then 5 or 6 meters. Then, you just have to adjust the light in question to the same height as the other by comparing the halos. If neither of them goes, there are tutorials very well done on this subject.